CONTACT US: 084-210800 & 084-218456 | info@jincorp-sky.com

Description

ZinCurve consist of Full Curve Contour, Middle and Both End Curve Contour and End Curve Contour which was developed to provide versatility and creativity, giving softer look for a building and enhance its appearances and finishing.


Suitable For :

  • Apartments
  • Bungalows
  • Factory Buildings
  • Hostels
  • Housing Projects
  • Multi-Purpose Halls
  • Quarters
  • School Buildings

Benefits

  • Less supporting framework for ridges, fascias and parapet.
  • Do away with the coventional ridge capping as the roof is fully rounded at the apex.
  • Reduced work involved in installation of ridge capping and fascia cladding.

Sectional dimension

TOLERANCES : Length: 0-10mm | Width: +/-3mm | Thickness: +/-0.03mm

Installation
ZinCurve is pierce-fixed to timber or steel supports using a power drill. This means that fastener screws pass through the sheeting.
See the diagram below to understand how to install each fastener screw with the accurate side lapping of roofing sheets.


CREST FIXING

To maximise roof water tightness, always place screws through the crests.
Always drive the screws perpendicular to the sheeting, and in the centre of the corrugation or rib.


FASTENERS

To match the performance of ZinCurve, the fastener must conform to AS 3566 Class 3

CUTTING

Before using a power saw with a metal cutting blade. ZinCurve profile coloured surface must be positioned facing the ground. No hot particles or debris allow to come into contact with the ZinCurve profile.

CLEANING

To prevent premature corrosion at the completion of each day ensure the sheeting area is cleared of all debris, including nais, rivets, rags and all cutting or drilling filings.

CAUTION

Green timber should not come into contact with EnvioSeries® pre-painted steel, due to acidic substances in the timber which have a corrosive effect on the coating.

TURNING OF SHEETING ENDS

It is common practice to overlap sheets into gutters by 50mm when the roof pitch is 25 degrees or in extreme weather areas. The pans of the sheets should be turned down at lower ends and turned up at upper ends.
Material Options
ZinCurve profile is available in an attractive range of colours in EnvioSeries® pre-painted steel and in unpainted GaluZinc® coated steel.


GaluZinc® stands for aluminium and zinc, bonded in almost equal amounts to coat the steel sheet with a silvery spangle, composed of aluminium (55%), zinc (43.4%) and a touch of silicon (1.6%). GaluZinc® steel delivers outstanding anti-corrosion performance.


EnvioPrime® steel sheet is precisely developed to provide subtle performance for ZinCurve profile with content of the protective polish.




EnvioClean® steel sheet is specifically designed with self-cleaning technology for ZinCurve profile surface where natural rain water is able to wash away dirt.


EnvioMatt® is steel sheet specifically engineered for ZinCurve profile with stylish matt surface, suited to address the undesirable glare from sunlight.




COLOUR SELECTION CHART


Others

Warranty

Warranty Subject to application and eligibility criteria up for 30 years. There are various factors that will determine whether a building is eligible for a warranty and the duration of any applicable warranty. Such factors include, but are not limited to, product selection, environmental influences, manufacturing specifications and product specific requirenments.

Accessories



Workmanship


SAFETY

Always work safety when installing metal products and use extreme caution on the roof at all times. Wear gloves and safety glasses to reduce the risk of injury, and use hearing protection when operating power tools. Alaways wear smooth soft-soled shoes; avoid ribbed soles that pick up and hold small stones, swart and other objects.


CARE AND STORAGE

Store metal panels indoors when possible; if outdoors; cover and elevate. Elevate one side higher for water drainage. Never cover in plastic. If a bundle gets wet, break bands and separate sheets; allow sheets to dry completely and only restack if completely dry. Material should be used promptly (within 3 months) to avoid the possibility of a storage related corrosion.


HANDLING

It is recommended that heavy-duty cut-resistant gloves and appropriate manual handling techniques or a lifting plan be used when handling material. Handle materials carefully to avoid damage: don't drag materials over rough surfaces or each other; protect from swarf.



Download Full Catalog

<-- ZinCurve Profile -->